Probe V6-182 3.0L (1990)
Compressor Clutch Coil: Service and Repair
With FX-15 Compressor
A/C Coil Pressing Tool - Installation
Removal
1.
Remove clutch hub and pulley.
2.
Install shaft protector tool T89P-19623-RH or equivalent on nose of compressor, and 2-jaw puller on coil Fig. 7.
3.
Tighten puller, forcing screw to pull coil from compressor head.
Installation
1.
Place coil on compressor head and ensure electrical connector is in correct position.
2.
Install using tool T89P-19623-EH or equivalent and 2-jaw puller.
3.
Install clutch hub and pulley on compressor.
