Probe V6-182 3.0L (1990)
1993 through 1995-Model Years - Kit "BB"
0.6 Hrs.
B70C
Parts Requirements
Parts will not be direct shipped for this program. Order your parts requirements through normal order processing channels.
PART NUMBER
KIT CODE
DESCRIPTION
DEALER PRICE
F4CZ-14406-A
Kit "AA"
Kit, Fuel/Pump Circuit
$16.45
F52Z-14408-AA
Kit "BB"
Harness, Fuel/Pump Circuit
$11.64
Parts prices current until next issue of Master Price Book. For latest prices, check or call your:
^
Order Processing Center
^
DOES II
^
Updated Price Book
Excess Stock Return
Excess stock returned for credit must have been purchased from Ford Parts and Service Division in accordance with Policy Procedure Bulletin 4000.
Claims Preparation
Enter using DWE.
Use code information shown below:
Program Code
- 95B70
Labor Operation - See Above
See Section 5 & 6 of the ACESII manual for detailed instruction.
Attachment III-A - Tech. Instruct- 1989-92 Non-Turbo Probe
Fuel Pump/Sender Jumper Wire Modification Instructions
SERVICE PART NUMBER F4CZ-14406-A KIT CONTENTS
ENGINEERING PART NUMBER
DESCRIPTION
QUANTITY
Jumper Harness
1
Tie Strap
1
I.S. 8156
Instruction Sheet
1
Affected Vehicles:
1989/90/91/92 Non-Turbo engine equipped Probes.
Technical Instructions
1.
Open doors. Connect Rotunda Memory Saver 014-R1064 to retain memory in radio settings, engine learn strategies, etc.
2.
Open hood and disconnect battery negative cable.
3.
Position both front seats forward.