Probe V6-182 3.0L (1990)
Technical Service Bulletin # 91S24
Date: 910206
Recall - Daytime Running Lamp Module Replacement
91S24
SAFETY RECALL
1990 Model GL and LX Probes - Daytime Running Lights Operation
Dealer Letter
Attachment I
^
Administrative Information
Attachment II
^
Labor Allowances
^
Parts Ordering Information
Attachment III
^
Technical Instructions
Customer Notification Letter
Attachment I - Administrative Information
CARES / OASIS
You must use CARES or OASIS to determine if a vehicle is involved in this or another Recall.
Tell owners of any other recalls that may be uncompleted. Complete all recalls during a single visit by the owner.
Promptly Correct
^
Affected vehicles on the enclosed list.
^
Other affected vehicles which are brought to your dealership.
NOTE:
Correct all affected vehicles in dealer stock before delivery to owners.
Dealer-Owner Contact/Action
If you are aware of any subject vehicles in your region, and the owner's name does not appear on the enclosed list immediately contact the owner and
arrange a service date. Give the owner a copy of the Owner Letter.
Dealership Responsibilities
Dealers are responsible to perform this recall service promptly following presentation of the vehicle by the owner. It is important that you promptly
report to the "National Owner Relations Office" at Oakville any instance in which an owner will not allow you to complete this recall because of
objections in scheduling or for any other reason.
Reimbursement For Recall Completion And Claims Submission Instructions
^
Submit claims for all completed units.
^
Claim reimbursement through the Direct Warranty Entry (DWE) system using the RECALLS screen. Use the RECALLS screen only (PF3 Recall
Entry/Retrieval on the DWE Menu Screen). If the claim number contains more than six digits, enter only the last six digits.
NOTE:
Claim Form 1864 will no longer be mailed to owners. Use a Form 6125-2 or an authorized computer generated claim form as an internal repair order
to support DWE Entry through the RECALLS screen. Ensure that only the RECALLS screen is used when inputting completion and reimbursement
information.
^
Dealers without DWE capability must mail the second copy of a completed Form 1864 to Warranty Claims Processing at Oakville for
reimbursement. Forms submitted must show all parts used and their cost, the parts handling allowance, and be imprinted, dated and signed by
authorized dealership personnel.
^
All claims must show 91S24 in the recall box.
Attachment II - Labor and Parts Information
