Probe V6-182 3.0L (1990)
Figure 21
^
Refer to TSB 90-22-2 for a revised "blow out clip" and channel, and revised door glass adjustment procedures. The revised blow out clip is stronger
and will not bend. This TSB contains Figure 19 for a picture of the revisions and Figures 20 and 21 for door glass adjustments.
^
Door glass that is improperly adjusted.
^
Door glass that does not apply enough pressure on the weatherstrip at the side view mirror area.
NOTE:
THE INSTALLATION OF THE NEW BLOW OUT CLIP AND CHANNEL ASSEMBLY REQUIRES A VERY PRECISE ADJUSTMENT
OF THE DOOR GLASS.
The "blow out clip/channel replacement and door glass adjustment procedures are as follows:
Blow Out Clip Inspection
Figure 19
BLOW OUT CLIP INSPECTION
