Probe V6-182 3.0L (1990)
Idle Speed: By Symptom
Technical Service Bulletin # 9336
Date: 930203
High Cold Idle RPM After Recall 91E08 Performed
Article No.
93-3-6
February 3, 1993
^
IDLE - 3.0L - HIGH COLD IDLE RPM AFTER EMISSIONS RECALL 91E08 PERFORMED - LX MODELS WITH 4EAT TRANSMISSIONS
^
EMISSIONS RECALL 91E08 - 3.0L - HIGH COLD IDLE RPM AFTER RECALL PERFORMED - LX MODELS WITH 4EAT
TRANSMISSIONS
FORD: 1990-91 PROBE
CALIBRATION: 0-10B-R00, 1-10B-R10
WARNING:
THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE
CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.
ISSUE:
A high cold idle rpm condition may exist after Emissions Recall 91E08 has been performed on certain 1990 Probe LX model vehicles. This occurs
because of the powertrain control module program. condition on these models.
ACTION:
Install a revised powertrain control module. Refer to the 1991 Probe Service Manual, Section 18-00, for installation details. (Similar concerns have also
been identified on certain 1991 Probe LX models. A revised module will also resolve the condition on these models.)
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it
with a clear plastic decal shield.
PART NUMBER
PART NAME
CLASS
F1PZ-12A650-EA
Powertrain Control Module
B
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage, Emissions Warranty Coverage
OPERATION DESCRIPTION
TIME
930306A
Replace PCM
0.4
DEALER CODING
BASIC PART NO.
CONDITION CODE
12A650
08
