Probe V6-182 3.0L (1990)
14.
Secure jumper harness using supplied plastic tie strap. See Figure 3.
15.
Install luggage compartment side cover by first connecting compartment lamp then snapping cover in place.
16.
Install two (2) screws, six (6) pushpins and seat belt trim.
17.
Position luggage compartment rear cover and secure using removed fasteners and pushpins.
18.
Install package tray and cargo net, if equipped.
19.
Connect battery negative cable, close hood then remove Memory Saver.
20.
Start vehicle to verify proper fuel pump function.
Dealer Letter
To:
All Ford and Lincoln-Mercury Dealers
Subject:
Owner Notification program 95B70 - Fuel Pump/Sender Electrical Circuit Modification on Certain 1989 through 1995-Model Year Probe Cars
OASIS
YES
Owner List
YES