Probe V6-182 3.0L (1990)
Figure 4
8.
Remove and throw away the Number 2 silencer hangers and rubbers which are located in front of the presilencer, Figure 4. After removing the
hangers from the body, put the bolts back to the body to prevent water from entering.
9.
Inspect the upper radiator hose clamp tips. If the tips are straight up, rotate the clamp 90~ to the left.
OTHER APPLICABLE ARTICLES: None
SUPERSEDES:
90-21-6
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION
DESCRIPTION
TIME
902304A
Install Radiator Mount &
1.2 Hrs.
Engine Mount
DEALER CODING
BASIC PART NO. CONDITION CODE
6068
67
OASIS CODES:
608000, 608400, 703000, 703100
Technical Service Bulletin # 9336
Date: 930203
High Cold Idle RPM After Recall 91E08 Performed
Article No.
93-3-6
February 3, 1993
^
IDLE - 3.0L - HIGH COLD IDLE RPM AFTER EMISSIONS RECALL 91E08 PERFORMED - LX MODELS WITH 4EAT TRANSMISSIONS
^
EMISSIONS RECALL 91E08 - 3.0L - HIGH COLD IDLE RPM AFTER RECALL PERFORMED - LX MODELS WITH 4EAT
TRANSMISSIONS
FORD: 1990-91 PROBE
CALIBRATION: 0-10B-R00, 1-10B-R10
WARNING:
THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE
CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.
ISSUE:
