Probe V6-182 3.0L (1990)
Steering Gear: Adjustments
Less Variable Assist
RACK PRELOAD
1.
Removed rack from vehicle and mount in holding fixture tool No. T57L-500-B, or equivalent.
2.
Measure pinion torque using an inch lb. torque wrench and pinion adapter tool No. T88C-3504-BH or equivalent. Torque should be 88.5-123.9
inch lbs.
3.
In pinion torque is not within specifications, loosen pinion locknut.
4.
Using torque gauge tool No. T88C-3504-AH or equivalent, torque adjust cover to 7.2 ft. lbs. then loosen it.
5.
Torque adjust cover again to 3.6 ft. lbs. then loosen the adjusting cover 45°.
6.
Using yoke locknut wrench tool No. T88C-3504-KH or equivalent, then tighten to specifications.