Probe V6-182 30L (1990) | Steering and Suspension | Lower Ball Joint Repair
Ball Joint: Service and Repair
Ball Joint, Upper
Fig. 6 Removing Ball Joint Dust Boot
Fig. 7 Installing Ball Joint Dust Boot
The ball joints on this vehicle are not serviceable parts. Only the dust boots are replaceable.
1.
Remove lower control arm as outlined elsewhere in this section.
2.
Place control arm in a vise.
3.
Remove dust boot with a chisel, Fig. 6. Use caution not to damage ball joint.
4.
Liberally coat inside of new dust boot with lubricant C1AZ-19590-B or equivalent.
5.
Install dust boot with dust boot installer tool No. T88C-5493-AH or equivalent, Fig. 7.
6.
Install lower control arm.
