Probe V6-182 3.0L (1990)
Wheel Bearing: Service and Repair
Front Wheel Bearings Replacement
DISASSEMBLY
Disc Brake Rotor/wheel Hub.
1. Remove the rotor.
2. Remove the bearing grease seal using a large screwdriver. Discard the seal.
3. Remove the hub assembly from the steering knuckle using T87C-1104-A.
Disc Brake/rotor Disassembly
NOTE: If the inner race remains on the hub, grind a section of the inner bearing race to approximately 0.5 mm (0.0197 inch) then use a chisel to remove
the race.
Disc Brake Rotor/wheel Hub.