Probe V6-182 3.0L (1990)
Installing Grease Seal.
5. Install snap ring into the steering knuckle.
6. Lubricate the grease seal lip with Lubricant before installing the seal.
7. Install a new grease seal using Seal Installing Tool T87C-1175-A.
Pressing Hub Assembly Into Steering Knuckle.
8. Install the hub assembly into the steering knuckle using a hydraulic press and suitable fixtures.
SPECIAL SERVICE TOOLS:
T00L-4201-C
Dial Indicator
T85M-3395-A
Tie Rod End Separator
T87C-1104-A
Knuckle Puller
T87C-1175-B
Dust Shield Installer
T87C-1175-A
Seal Installer
D80L-1002-L
Two Jaw Puller
T80T-4000-W
Handle