Probe V6-182 3.0L (1990)
Clutch: Service and Repair
One-Way Clutch, A/T
One-Way Clutch and Planetary Carrier - With 4EAT
DISASSEMBLE
Exploded View Of One-Way Clutch And Planetary Carrier Assembly
NOTE: Refer to the Exploded View Of One-way Clutch And Planetary Carrier Assembly image when disassembling and assembling the one-way clutch
and planetary carrier.
1. Check carrier hub assembly for worn gear and operation.
2. Check clearance between pinion washer and planetary carrier. Clearance should be 0.008-0.028 inch.
3. Check for damage or worn inner race, snap ring, and bearing race.
4. Check one-way clutch for damage or wear and check operation.
5. Check for detached roller.
ASSEMBLE
1. Reverse procedure to install.
2. Ensure one-way clutch rotates smoothly and only clockwise.
3. Lubricate bearing races, then install to both sides of one-way clutch and carrier hub assembly.
4. Install bearing race tabs into alignment holes.
One-Way Clutch and Small Sun Gear - With 4EAT
DISASSEMBLE
