Probe V6-182 3.0L (1990)
Clutch: Service and Repair
Reverse Clutch
DISASSEMBLE
Exploded View Of Clutch Assembly
1. Refer to the Exploded View Of Clutch Assembly image for disassembling procedure.
ASSEMBLE
1. Apply small amount of automatic transaxle fluid to inner and outer faces of seal, then install on rear clutch. Face outer seal lip toward the inside by
gently rolling it down around the circumference for easier installation.
2. Install drum in reverse and forward drum.
3. Install reverse piston by pushing evenly around circumference, ensuring not to damage outer seal.
4. Install piston return spring with tabs