Probe V6-182 3.0L (1990)
7.
Measure the inboard distance of the glass at points A, B and C, Figure 3. The measurement at point A should be 23.5 mm +/- 1.5 mm. The
measurement at point B should be 19.5 mm +/- 1.5 mm. The measurement at point C should be 24.0 mm +/- 1.5 mm.
8.
If inboard or outboard door glass adjustment is necessary, locate the phillips slotted stud that holds the door glass regulator.
9.
Loosen the lock nut on the phillips sloted stud and turn the screw to adjust the door glass to the specification in Step 7.
10.
Re-install the interior door trim panel.
11.
Re-install the door glass seal in the roof retainer.
12.
If the windnoise or water leak concerns are still present or the proper adjustment cannot be reached, proceed to the weather seal retainer
modification.
Weather Seal Retainer Modification
1.
Remove the weather seal from the roof retainer.
2.
Remove the roof retainer from the car.
3.
Starting at the front of the roof retainer, enlarge the first three (3) attaching screw holes from 5 mm to 7 mm.
4.
Re-position the roof retainer. Use flat washers on the enlarged holes.
5.
Before tightening the roof retainer attaching screws, pull the roof retainer outward and then secure the attaching screws.
6.
Re-install the weather seal to the roof retainer.
7.
If windnoise or water leak concerns are still present, proceed to the door opening body weatherstrip inspection.
Door Opening Upper Body Weatherstrip Inspection
1.
Check for proper air and water sealing of the door glass to the upper door opening body weatherstrip.
2.
If necessary, install a new design weatherstrip with a thicker trailing edge that improves sealing. Refer to TSB 90-7-5 for details.
Misc. Information
OTHER APPLICABLE ARTICLES: 90-7-5
SUPERSEDES:
89-10-2
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION DESCRIPTION
TIME
902202A
Install Blow Out Clip - Both
1.0 Hr.
Sides
902202B
Adjust Door Glass -
One
0.8 Hr.
Side
902202C
Adjust Door Glass -
Both
1.4 Hr.
Side
902202D
Modify Weather Seal -
One
0.3 Hr.
Side
902202E
Modify Weather Seal -
Both
0.6 Hr.
Side
DEALER CODING
BASIC PART NO.
CONDITION CODE
7021597
02
OASIS CODES:
102000, 110000, 701000