ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Battery Cables > < General Procedures|Removal and Installation|Battery

Puma 1998 (06.1997-12.2001)

Battery, Mounting and Cables - Battery Tray Puma 1998 (06/1997-12/2001)
Removal and Installation

Removal

  1. Remove the battery.
    For additional information, refer to Battery in this section.

  1. Remove the cable tie (if equipped).

  1. Detach the battery positive cable and auxiliary power cable retaining clips from the battery tray.

  1. Detach the battery ground cable retaining clip from the battery tray.

  1. Remove the battery tray.

Installation
  1. To install, reverse the removal procedure.

Battery Cables > < General Procedures|Removal and Installation|Battery