ford Workshop Repair Guides

Ford Puma Workshop Service and Auto Repair Manuals

ABOUT US
General Procedures > < Handles, Locks, Latches and Entry Systems

Puma 1998: Locks, Latches & Entry Systems Diagnosis & Testing

Handles, Locks, Latches and Entry Systems - Locks, Latches and Entry Systems Puma 1998 (06/1997-12/2001)
Diagnosis and Testing

General Equipment
FDS 2000

Inspection and Verification

  1. Verify the customer concern.
  1. Visually inspect for obvious signs of damage. Refer to the following chart:

Visual Inspection Chart

Mechanical Electrical
  • Latches.
  • Blown fuse(s).
  • Loose or corroded electrical connectors.
  • Keyless entry remote transmitter.
  • Keyless entry remote transceiver.
  • Damaged circuits.
  1. If visual inspection reveals an obvious cause, rectify this before continuing.
  1. Carry out the Service Test Mode. REFER to Section  419-01A Anti-Theft - Active / 419-01B Anti-Theft - Passive.REFER to Section  419-01A Anti-Theft - Active / 419-01B Anti-Theft - Passive.
  1. If the concern remains after visual inspection, use FDS 2000 to diagnose the system.

General Procedures > < Handles, Locks, Latches and Entry Systems