ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Hydraulic Control Unit (HCU) - Vehicles With: Four-Wheel Anti-Lock Brake System (ABS) > < G-Switch - Vehicles With: Four-Wheel Anti-Lock Brake System (ABS)

Ranger 2006.5 (05.2006-)

Anti-Lock Control - Front Wheel Speed Sensor—Vehicles With: Four-Wheel Anti-Lock Brake System (ABS) Ranger 2006.5 (05/2006-)
Removal and Installation

  1. When removing the ABS wheel-speed sensor on the right side, remove the washer tank installation bolts and the connector, then move the washer tank to a place out of the way.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Connector
2
-
Bolt
3
-
Front ABS wheel-speed sensor

3. To install, reverse the removal procedure.

Hydraulic Control Unit (HCU) - Vehicles With: Four-Wheel Anti-Lock Brake System (ABS) > < G-Switch - Vehicles With: Four-Wheel Anti-Lock Brake System (ABS)