Ford Workshop Service and Repair Manuals > Ranger 2006.5 (05.2006-) > Mechanical Repairs | 3 Powertrain | 308 Manual Transmission-Transaxle, Clutch and Transfer Case | 308-02 Clutch Controls | Description and Operation | Removal and Installation | Clutch Master Cylinder - Vehicles With: 5-Speed Manual Transmission (S15M)-5-Speed Manual Transmission (S15MX)

Clutch Controls - Clutch Master Cylinder—Vehicles With: 5-Speed Manual Transmission (S15M)/5-Speed Manual Transmission (S15MX)

Ranger 2006.5 (05/2006-)

Removal and Installation

Special Tool(s)

Flare Nut Wrench

49 0259 770B

CAUTION:Fluid will damage painted surfaces. Be careful not to spill any fluid on painted surfaces. If it is spilled, wipe it off immediately.

1. Remove the components in the order indicated in the following illustration(s) and table(s).

2. To install, reverse the removal procedure.

Bleed the air from the system.
For additional information, refer to: Clutch System Bleeding (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures).

Inspect and adjust the clutch pedal.
For additional information, refer to: Clutch Pedal Freeplay Adjustment (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures).

Ford Workshop Service and Repair Manuals