| Removal and Installation Removal All vehicles | | -
Disconnect the battery ground cable.
For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
| | | -
Drain the cooling system.
For additional information, refer to: Cooling System Draining, Filling and Bleeding (303-03 Engine Cooling, General Procedures).
| Vehicles with air conditioning | | -
Remove the evaporator core housing.
For additional information, refer to: Evaporator Core Housing (412-02 Heating and Ventilation, Removal and Installation).
| All vehicles | | -
Remove the instrument panel.
For additional information, refer to: Instrument Panel (501-12 Instrument Panel and Console, Removal and Installation).
| | | -
Remove the in-vehicle crossbeam.
For additional information, refer to: In-Vehicle Crossbeam (501-12 Instrument Panel and Console, Removal and Installation).
| | | -
Disconnect the heater hoses. | | | -
Remove the heater core housing. - Remove the nuts.
- Remove the heater core housing.
| Installation | | -
To install, reverse the removal procedure. | |
