General Procedures Entering the programme mode NOTE:If no buttons are pressed for a period of 15 seconds or more the programming mode will automatically exit. | -
Press and hold buttons A and B for four seconds or more. | | -
Press button A to select the item that you want to adjust. | Overview of the main menu displays | -
The various sub-menus are accessed from the main menu. | Setting up Pitch and Roll | -
Press and hold buttons A and B for four seconds or more. | | -
Press button A to select PITCH set up mode. | | -
Press button B to set zero degrees. | | -
Press button A to select ROLL set up mode. | | -
Press button B to set zero degrees. | | -
Exit the programme mode. | Exiting the Prorgramming Mode NOTE:If no buttons are pressed for a period of 15 seconds or more the programming mode will automatically exit. | -
Press button B when PGM is shown. | |