| General Procedures | | -
Adjust the tire pressure to the specification. | | | -
Position the unloaded vehicle on a flat, level surface. | | | -
Seat one person in the driver’s seat. | | | -
Position the vehicle straight ahead and perpendicular to the white screen. | | | -
Set the headlights 3 m {9.8 ft} from the white screen. | | | -
Place an object in front of the headlight not being adjusted to block its light beam. | | | -
Start the engine so that the battery remains charged. | | | -
Turn on the low-beam headlight. | | | -
Adjust the headlight by loosening the adjusting screw as shown in the figure. | | | -
Turn the adjusting screw, and adjust the brightness borderline of the headlight to the position shown in the figure. | | |
