ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Headlamp Bulb > < Headlamp Leveling Switch

Ranger 2006.5 (05.2006-)

Exterior Lighting - High Mounted Stoplamp Ranger 2006.5 (05/2006-)
Removal and Installation

  1. Disconnect the negative battery cable.
    For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Cover
See Removal Detail
2
-
Screw
3
-
High-mount brake light
4
-
Connector
5
-
High-mount brake light bulb
6
-
Socket

3. To install, reverse the removal procedure.

Removal Details

Item 1 : Cover
  1. Insert a tape-wrapped flathead screwdriver into the service hole, and pry it to secure a space.

  1. Insert your hand into the space and remove the cover in the direction shown in the figure.

Headlamp Bulb > < Headlamp Leveling Switch