| Removal and Installation Removal | | -
Disconnect the negative battery cable (vehicles with front tweeter). | | -
Pull the inner garnish outward and detach clips A. | | -
Disconnect the front tweeter connector (vehicles with front tweeter). | | -
Remove the inner garnish. | | | -
Remove the following parts: - Regulator handle.
For additional information, refer to: Door Window Regulator Handle (501-11 Glass, Frames and Mechanisms, Removal and Installation).
- Front door trim.
For additional information, refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
- Front door glass.
For additional information, refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).
| | | -
Remove the nuts and the bolts. | | | -
Remove the front manual window regulator through the speaker installation hole. | Installation | | -
Install in the reverse order of removal. | | |
