| Removal and Installation Removal | | -
Disconnect the negative battery cable.
For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
| | | -
Disconnect the connector. | | | -
Pull the windshield wiper motor forward until the connection between the windshield wiper motor and windshield wiper link is in the engine room. | | | -
Pry off the connection between the windshield wiper motor and windshield wiper link. | | | -
Remove the windshield wiper motor. | Installation | | -
Install in the reverse order of removal. | | |
