Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
2
Disconnect the antenna lead in cable.
3
Push the rubber grommet through the sheet metal and feed the antenna lead in cable through the hole.
5. Remove the radio chassis.
6. Remove the antenna lead in cable.
1
Open the glove box door.
2
Release the tabs and lower the glove box to the full open position.
3
Unclip the antenna lead in cable wire clips.
4
Pull the antenna lead in cable through the hole and remove the remove the antenna lead in cable.
INSTALLATION
1. To install, reverse the removal procedure.
