Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Front Door Exterior Handle: Service and Repair
Heavy Duty Riveter
SPECIAL TOOL(S)
REMOVAL
1. Remove the front door trim panel.
2. Remove the water shield.
3. Remove the outside door handle.
1. Disconnect the front door latch to door handle rod.
2. Drill out the two rivets and remove the outside door handle.
NOTE: The front door window glass must be completely up.
INSTALLATION
1. To install, reverse the removal procedure.
-
Use Heavy-Duty Riveter to secure the rivets.