Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
2. Install the rear anti-lock brake sensor.
1
Position the rear a anti-lock brake sensor and install the bolt.
2
Connect the rear anti-lock brake sensor electrical connector.
CAUTION: Do not apply force to the plastic rear anti-lock brake sensor electrical connector. The rear anti-lock brake sensor should slide into the
mounting opening.
Front
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Disconnect the front anti-lock brake sensor wire from the vehicle frame.
1
Disconnect the electrical connector.
2
Unclip the front anti-lock brake sensor wire from the vehicle frame.
