Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Brake Caliper: Service and Repair
Removal and Installation
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Disconnect the front brake hose.
1
Remove the front brake hose bolt.
2
Disconnect the front brake hose.
3
Remove and discard the copper washers. Plug the front brake hose.
WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES.
WASH HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING
WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK
WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.
4. Remove the disc brake caliper.
1
Remove the disc brake caliper bolts.
2
Lift the disc brake caliper off the front disc brake caliper anchor plate.
5. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
INSTALLATION