Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Crankshaft: Testing and Inspection
End Play
1. Use the Dial Indicator With Bracketry to measure crankshaft end play.
2. Position the crankshaft to the rear of the cylinder block.
3. Zero the Dial Indicator With Bracketry.
4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
-
If crankshaft end play exceeds specifications, replace the crankshaft thrust washers or thrust bearing.