Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Crankshaft Gear/Sprocket: Service and Repair
REMOVAL
1. Remove the timing belt.
2. Install the Camshaft Sprocket Holding/Removing Tool on the sprocket.
-
Remove the bolt and washer.
3. Remove the camshaft sprocket.
INSTALLATION
1. Position the key and camshaft sprocket on the shaft.
2. Install the Cam Sprocket Holding/Removing Tool on camshaft sprocket.
3. Tighten the bolt.