Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
6. Remove the A/C clutch field coil.
1
Note the location of the A/C clutch field coil electrical connector.
2
Install the Shaft Protector for Coil Removal on the nose opening of the A/C compressor.
3
Install the Differential Side Bearing Puller.
4
Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and pulley bearing mounting surfaces.
2. Install the A/C clutch field coil.
1
Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.
2
Place the Field Coil Replacer on the A/C clutch field coil.
3
Place the Coil Pressing Tool on the Field Coil Replacer.
4
Use the 2-Jaw Puller to install the A/C clutch field coil until bottomed completely against the A/C compressor.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The bearing is a tight fit on the A/C compressor head; it must be properly aligned to push on.
