Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. If the A/C vacuum reservoir tank and bracket is visible from above in the engine compartment, perform Steps 2 through 4. If the A/C vacuum
reservoir tank and bracket is not visible in the engine compartment, perform Steps 5 through 8.
NOTE: The A/C vacuum reservoir tank and bracket is located either on or beneath the RH front fender splash shield.
2. Remove the screws and the A/C vacuum reservoir tank and bracket.
3. Disconnect the vacuum supply and outlet hoses.
4. Disconnect the vacuum hose from the back of the lank if equipped with 4-wheel drive.
5. Remove the Engine Air Cleaner (ACL).
6. Remove the RH front fender splash shield.
7. Remove the nuts and remove the A/C vacuum reservoir tank and bracket.