Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Canister Purge Solenoid: Service and Repair
REMOVAL
1. Remove the evaporative emissions canister (EVAP canister).
2. Remove the canister vent solenoid valve.
INSTALLATION
1. Follow the removal procedure in reverse order.
2. Perform the leak test. See: Testing and Inspection/Component Tests and General Diagnostics/Component Tests/EVAP System Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle. See: Testing and Inspection/Component Tests and
General Diagnostics/EVAP Running Loss System Repair Verification
