ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Throttle Position Sensor - High Engine Idle Speed|Page 4170 > < Throttle Position Sensor - High Engine Idle Speed
Page 1
background image

Throttle Position Sensor: All Technical Service Bulletins
Throttle Position Sensor - High Engine Idle Speed

Article No.
00-3-5

02/07/00

HIGH IDLE - TAURUS WITH 3.4L SHO AND RANGER WITH 2.5L AND MANUAL TRANSMISSION

FORD: 
1998-1999 TAURUS SHO 
1998-2000 RANGER

ISSUE
A high idle may occur on some vehicles. This may be caused by a poor electrical connection at the wire harness (-12B637-) to Throttle Position Sensor
(TPS).

ACTION
Splice into wire harness (-12B637-) just after the TPS with TPS Connector High Idle Service Kit. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

Verify the concern vehicle exhibits a "high idle" condition when depressing the clutch or shifting between gears for the Ranger or when shifting between
Park and/or Neutral for Taurus SHO. If high idle condition is not exhibited, proceed with other driveability diagnostic fix procedures. If condition is
present, obtain a High Idle Service Kit (XF1Z-15K607-AA) and proceed by following the instructions found within the service kit.

PART NUMBER

PART NAME

XF1Z-15K607-AA

High Idle Service Kit

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emission Warranty Coverage

OPERATION

DESCRIPTION

TIME

000305A

Install High Idle Service Kit

0.6 Hr. 

(Ranger)

000305B

Install High Idle Service Kit

0.7 Hr. 

(Taurus SHO)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

12B637

30

OASIS CODES: 203200, 617400, 619400

Throttle Position Sensor - High Engine Idle Speed|Page 4170 > < Throttle Position Sensor - High Engine Idle Speed