Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Ignition Switch Lock Cylinder: Service and Repair
Key Release Button
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
(1) Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
(2) Push the ignition switch lock cylinder release tab with arch while pulling out the ignition switch lock cylinder.
3. If equipped, remove the tilt wheel handle.
4. Remove the upper and lower steering column shrouds.
(1) Remove the screws.
