Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Alignment: Service and Repair
Toe
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings; follow the manufacturer's instructions.
4. Remove the clamps.
NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie rod is rotated.
5. Loosen the nuts.
-
Clean and lubricate the nut(s) and front wheel spindle tie rod threads