Ranger 2WD L4-153 25L SOHC VIN C SFI (1998) - Lower Control Arm Service
8. Remove the front suspension upper arm.
(1) Remove the two nuts and bolts.
(2) Remove the front suspension arm bushing joint.
INSTALLATION
1. Align the marks made during removal on the front suspension lower arm adjustment cam.
2. Install the front suspension upper arm.
(1) Position the front suspension upper arm.
(2) Install the two bolts and nuts.
NOTE: The forward front suspension upper arm nut must be tightened first while the arm is held at the curb position ride height.
3. Install the upper ball joint into the front wheel spindle.
(1) Position the upper ball joint in the front wheel spindle.
(2) Install the pinch bolt and nut.