1998 Ranger 2WD L4-153 25L SOHC VIN C SFI Shift Interlock Solenoid Spec
Shift Interlock Solenoid: Service and Repair
REMOVAL
1. Remove the steering column assembly.
2. Remove the insert plate and the shift lock actuator.
1. Remove the bolts.
2. Remove the insert plate and the shift lock actuator.
3. Remove the insert plate from the shift lock actuator.
-
Remove and discard the shift lock actuator clip.
NOTE: The shift lock actuator clip is an assembly aid for the assembly plant and does not need to be replaced.
INSTALLATION
1. Follow the removal procedure in reverse order.