Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
7. Connect the SSA/SS1 and SSC/SS3 Shift (SS) solenoid electrical connectors.
8. Connect the TCC, CCS, SSB/SS2, and EPC solenoid electrical connectors.
9. Install the wire harness guide and protector.
-
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire harness guide and protector.
CAUTION: Excessive pressure may break the retaining pins.
10. Install the transmission fluid filter.
1. Install the transmission fluid filter.
2. Install the screw.
