Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Band: Adjustments
Overdrive Band
Special Tools
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. Disconnect the shift cable.
1. Disconnect the shift cable from the manual control lever.
2. Disconnect the shift cable from the bracket.
4. Remove and discard the locknut.
CAUTION:
-
Do not allow the screw to back out. Band strut could fall out of position.
-
Throw the locknut away. The locknut is not reusable for assembly.
5. Tighten the screw using Band Adjustment Torque Wrench Set and back off the screw exactly two (2) turns and hold that position.
