Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
6. Install the coast clutch piston into the overdrive band brake and coast clutch drum.
CAUTION: Care must be taken to prevent damage to the seals during installation.
7. Install the coast clutch piston springs.
1. Install the twenty (20) coast clutch piston springs.
2. Position the coast clutch piston spring retainer.
8. Install the coast clutch piston spring retainer ring.
1. Use Clutch Spring Compressor to compress the coast clutch piston springs.
2. Install the coast clutch piston retaining ring.
CAUTION: Do not fully compress the Clutch Spring Compressor or damage to the coast clutch piston spring retainer may occur.
9. When installing friction plates, the word "TOP" should face up. If reusing plates, grooves must be installed clockwise. Install the coast clutch disc
pack.
CAUTION:
-
Coast clutch friction plates are directional and must be installed with grooves clockwise (I.D. to O.D.). The word "TOP" should face up.
-
If new clutch plates are being used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
