Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
9. Use a Clutch Spring Compressor to install the direct clutch piston retaining ring.
1. Install the Clutch Spring Compressor and compress the direct clutch piston springs.
2. Install the direct clutch piston retaining ring.
WARNING: AFTER REMOVING THE RETAINING RING, USE CARE WHEN RELEASING THE PRESSURE ON THE SPRINGS.
CAUTION: Do not fully compress the Clutch Spring Compressor or damage to the spring retainer may occur.
10. When installing friction plates, the word (TOP) should face up. If reusing plates, grooves must be installed clockwise. Install the direct clutch disc
pack.
CAUTION:
-
The direct clutch friction plates are directional and must be installed with grooves pointing clockwise (I.D. to O.D.) and the word (TOP)
facing up.
-
If new plates are used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
11. Install the steel clutch plates and friction clutch plates in alternating order starting with a steel clutch plate.
