Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Part 1 Of 3 - Overdrive Brake and Coast Clutch Drum Assembly
Part 2 Of 3 - Overdrive Brake and Coast Clutch Drum Assembly
Part 3 Of 3 - Overdrive Brake and Coast Clutch Drum Assembly
DISASSEMBLY
1. Remove the coast clutch pressure plate.
1. Remove the coast clutch retaining ring.
2. Remove the coast clutch pressure plate.
CAUTION:
-
If new plates are being used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.