Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
4. Remove the output shaft ring gear from the output shaft hub.
1. Remove the retaining ring.
2. Remove the output shaft ring gear.
ASSEMBLY
1. Install the output shaft ring gear onto the output shaft hub.
1. Install the output shaft ring gear.
2. Install the retaining ring.
2. Install the No.10A needle bearing race assembly.
-
Snap the needle bearing race assembly onto the output shaft hub.
3. Install the No. 10B needle bearing onto output shaft ring gear and output shaft hub.
