Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
2. Clean and inspect the overdrive one-way clutch and center shaft.
CAUTION: Do not remove the overdrive one-way clutch. Damage to the clutch may occur if it is removed.
-
Inspect for cracks in the roller cage and wear on the roller clutch, the press fit of the one-way clutch to the center shaft, and the spring and
roller cage for bent or damaged spring retainers.
3. Inspect the one-way clutch.
-
Temporarily insert the overdrive planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch.
-
The planetary gear must rotate counterclockwise and hold when rotated clockwise.
-
Remove the planetary gear carrier assembly.
ASSEMBLY
1. Install the center shaft and one-way clutch.
1. Install the center shaft and one-way clutch.
2. Install the center shaft retaining ring.