Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
-
Thoroughly clean all parts and blow dry with moisture free compressed air.
-
Use petroleum jelly to hold the overdrive planetary thrust bearing (No. 2) in place.
2. Install the overdrive planetary gear carrier into the center shaft and front ring gear.
3. Install the overdrive sun gear.
1. Install the overdrive sun gear.
2. Install the coast clutch to overdrive carrier adapter.
CAUTION:
-
The part number that is stamped on the overdrive clutch adapter must face toward the overdrive sun gear or the coast clutch assembly will not
fit into the transmission.
-
Use care not to bend or damage the exciter wheel.
