Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
5. Install the nut.
CAUTION: Do not bend the manual valve inner lever pin.
6. Verify that the output shaft is locked in the PARK position.
CAUTION: Park pawl actuating rod must be properly installed into parking pawl and guide cup located in extension housing. Verify park linkage
function.
7. Install the manual valve detent spring.
8. Install the transmission fluid pan with new pan gasket.
9. Install the digital Transmission Range (TR) sensor.
10. Lower the vehicle.
11. Connect the battery ground cable.
12. Fill the transmission to the proper fluid level and check for proper transmission operation.
-
Use Mercon V Automatic Transmission Fluid XT-5-QM meeting Ford specification Mercon V.
