Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
Valve Body: Service and Repair
Removal and Installation
Special Tools
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the transmission fluid pan, filter, and gasket.
NOTE: If a transmission has been disassembled to replace worn or damaged parts and the valves in the main control valve body stick repeatedly
from foreign material, the torque converter must be removed and cleaned by using a mechanically agitated cleaner, such as the Torque
Converter/Fluid Cooler Cleaner.
4. Unclip main control valve body wire harness.
-
Lift up on wire harness guide and protector and disengage the retaining pins from the solenoid clamps.