ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - 4R44E/5R55E Whistling/Hissing Noise At Idle|Page 5799 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5794
Page 1
background image

Valve Body: All Technical Service Bulletins
A/T - 4R44E/5R55E Whistling/Hissing Noise At Idle

Article No. 
98-5-14

03/16/98

^

NOISE - "WHISTLING/HISSING" FROM 
TRANSMISSION MAIN CONTROL AREA DURING 
IDLE - VEHICLES WITH 4R44E OR 5R55E 
TRANSMISSION

^

TRANSMISSION - 4R44E OR 5R55E - 
"WHISTLING/HISSING" NOISE FROM MAIN 
CONTROL AREA DURING IDLE

LIGHT TRUCK: 
1997 AEROSTAR
1997-98 EXPLORER, MOUNTAINEER, RANGER

This TSB article is being republished in its entirety to include one chart to clarify the parts needed for repair.

ISSUE: 
A "whistling" or "hissing" noise from the main control area may occur while idling in Drive and/or Reverse on some vehicles that have either a 4R44E or
5R55E transmission. This may be due to an improperly sized orifice hole in the main control separator plate.

ACTION: 
Replace the separator plate with a revised separator plate. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1.

Perform normal diagnosis by referring to the appropriate model/year Service or Workshop Manual.

2.

Repair all Diagnostic Trouble Codes (DTCs) as listed.

3.

Repair all transmission concerns as required.

A/T - 4R44E/5R55E Whistling/Hissing Noise At Idle|Page 5799 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5794