Ranger 2WD L4-153 2.5L SOHC VIN C SFI (1998)
1. Install the clutch/brake pedal assembly.
-
Install the clutch/brake pedal bushings and washers.
-
Install the clutch pedal shaft threads, the clutch/brake pedal support and brake pedal.
NOTE: Before the installation of the clutch pedal shaft or clutch pedal, remove and inspect the brake and clutch pedal bushings. Clean and
lubricate with a light film of engine oil meeting Ford specification WSS-M2C153-G and replace the brake and clutch pedal bushing if excessive
wear is evident.
2. Install the retainer ring.
3. Install the clutch master cylinder and push rod to pedal pin.
4. Install the parking brake mechanism.
5. Install LH cowl side panel.
